If this is missing and you want to enable file and print sharing on this computer, click the install button and install File and Print sharing. Once the protocols are installed under the Network window, verify that File and Print sharing is installed.Double-click the "Local Area Connection.".Open Network properties by clicking Start > Settings > Control Panel, and double-clicking "Network and Dial-up connections.".Once the IP address and Subnet mask are specified, close out of all windows and reboot the computer.Therefore, on the other computer it could be 102.55.92.2 with the same subnet mask. The above IP address must differ for each computer. In Properties, select the option "Specify an IP address." Enter a value similar to the example below.Setup the TCP/IP protocol by highlighting the TCP/IP protocol for the network adapter and clicking the "Properties" button.Perform this configuration on each of the computers. Once the protocols are installed under the Network window, click the button "File and Print Sharing." In this window, you must specify if you want to enable file and print sharing on this computer.If one or both of these protocols are not listed for your network adapter, install the protocol.
Verify that TCP/IP and IPX/SPX are installed for your network adapter.Note that this is not the dial-up adapter. Verify your network card is listed as a network component.Open Network properties by clicking Start > Settings > Control Panel and double-clicking "Network.".Connect the two computers to each other.If problems are found with the network cards, see the basic network troubleshooting page. Verify network cards are installed correctly in Device Manager and that you have the latest network drivers for the installed network cards.Two computers with 10/100 Ethernet network cards installed and working Limited to two computers can connected to the network. Network with broadband Internet sharing.
0 kommentar(er)
